UP EQUIP
Menu

135-52STJ - WHEELED

  • Highest Easy Lift unit

  • Ultra-long articulated telescopic 21′ jib

  • NO computers

  • Simple inside

“With a major contract of church restoration, indoors and outdoors, our 116-52STJ will shorten the project at least 6 months”

C Turgeon, Construction Turco

Standard Features

  • 135′ working height
  • 52′ horizontal outreach
  • 51.5″ total width
  • Ultra-long telescopic 21′ jib
  • No computers
  • Unbeatable departure angle
  • Wireless remote control
  • Lightweight aluminium detachable basket
  • Hydraulic basket rotator
  • Extra-long black rubber tracks
  • Long travel outriggers
  • Proportional controls

Working Area

Options & Accessories

  • Emergency 12V electric pump
  • Automatic self leveling for outriggers
  • Non-marking soft rubber tracks
  • Special painting
  • Working lamp on basket
  • One man fiberglass basket
  • Two men fiberglass basket
  • Outriggers “sinking” alarm
  • Teflon pads kit (4) for stabilizers
  • Strobe light
  • Casters on basket
  • Winter start package
  • Hostile kit
  • Hatz diesel + Electric

    The EPA certified air cooled Hatz 2L40 model provides peace of mind. This extremely tough engine comes in a single block, without any external added components such as fan, alternator and strap. This brings easiness of maintenance, reliability and durability to your combustion power source. The top of line Lafert electric motor, both 110V and 208-240V allow drive and boom operation with no emission.

  • Lithium Ion Battery + Ultra-fast charger

    kaitek logoThis configuration is made for those who primarily work indoors, and in highly regulated environment. Equipped with the electric vehicle range world record holder Kaitek srl lithium ion battery pack, no wires, no combustion and no boundaries. The ultra-fast charger can be powered with either 110V or 208-240V.

  • Hatz Diesel + Lithium Ion Battery

    Configured this way, drive and operation are powered by Kaitek Lithium Ion pack, holder of the longest electric vehicle range world record. The Hatz 2L40 engine will be used only to recharge the battery.

  • Wireless remote control

    video iconThe wireless remote control provides an unbeatable perspective, allow driving, operating outriggers and boom operation from ground. It also provides a much better view of obstacles and terrain slopes & layouts. It comes standard with a neck strap for more stability, movement precision and safety.

  • Lightweight aluminium detachable basket

    The lightweight aluminium basket is movable by one person if required. This feature provides more flexibility when it’s required to insert unit in tight places. Made from 6061T aluminum, it can host multiple accessories. Floor is made of anti-skid plate and a 6 inches toe board.

  • video iconUltra-long 21′ jib operable at full basket capacity

    The 21′ telescopic jib is fully operable even at full basket capacity (440 pounds). It offers maximum unequaled insertion capabilities for better final positioning.

  • video iconHydraulic basket rotation

    Key element to refine working position, real hydraulic rotation offers better insertion and final adaptability, it allows optimal working conditions.

  • Travel alarm

    This audible alarm will go as long as unit moves both in combustion or electric mode. With safety standards present and future, this is a great safety asset.

  • Rubber wheels

    Made of durable rubber with a steel belt reinforcement, they are built to last.

  • video iconLong travel outriggers

    The tracks will be lifted nearly 4 feet off the ground, offering maximum stabilization adaptability on any unlevelled and levelled surfaces.

  • Variable outriggers patternsvideo icon

    There are multiple outriggers positions since every outrigger is mounted on a swing-out pivot, allowing standard position (19’ X 20’) or narrow position (12’ 7” X 24’ 11″). For crowded floors, it is possible to mix positions for more flexibility.

    GFI in basket to provide power

  • AC power to basket

    All units are equipped standard with GFI double outlet, with cable running through the boom.

  • Air or water lineAir/water line to basket

    Standard 3000 psi air/water line also runs from ground to basket through the boom to offer more flexibility and less weight in basket.

  • 85-135 ground & Basket controlsProportional controls

    Sauer Danfoss proportional ground controls allow smooth movements from both ground and basket controls. From basket, electric signal is sent down to ground and levers perform movements.

  • video iconManual Emergency descent system

    In case of minor problems or accidents, manual emergency descent pump will get the operator down by doing boom operations, outriggers setup and drive the unit if need be. An electric pump is available in option.

  • Easy Lift spider lifts hour meterHour meter

    To insure increased accuracy of maintenance schedule, the hour meter will be of great help to follow-up on inspections and maintenance.

  • video iconEmergency descent 12V electric pump

    Bringing harm operator or broken basket control to the ground is always possible from base using emergency descent procedure. Electric 12V emergency pump just makes it easier since no manual pumping is required.

  • video iconAutomatic self leveling for outriggers

    With the activation of a single button, unit will level in a perfect way, regardless of the surface. A nice to have option you will consider if moving unit often is required.

  •   Non-marking soft rubber wheels

    Never leave black marks anymore on all type of surfaces. Concrete, brick patio, stone, marble, wood, epoxy coating, and on. You will drive on the non-marking wheels with peace of mind and won’t need to bite on your profit to clean afterwards.

  • Multiple colors from RAL color codeSpecial painting

    Choose from over 1 million different colors to personalize your unit to your company’s colors using RAL international standard colors. The powder coat custom colors will be applied before assembly for better protection.

  • sunlight in darkest placesWorking lamp on basket

    For a better view of working area, under any circumstances, this powerful lamp will bring the sun everywhere.

  • Outriggers “sinking” alarm

    The active stability system on all our units cannot prevent ground to collapse under it. As long as outrigger’s pressure is supported from ground, the unit will be able to work even if it is inclined. This system will warn operator that the whole unit is inclined and/or sinking, even if it’s not possible to tell from basket.

  • Easy Lift outrigger padsTeflon pads kit (4) for stabilizers

    The outriggers needs some travel when they lift tracks off the ground. The 20 X 20 or 20 X 40 inches custom made teflon pads are designed to insure best load of each leg as well as best performance overall for operator. We recommend the 20 X 40 for this unit.

  • Strobe light

    With increasing safety regulations, this small option will soon make a huge difference: be able to go or not on a jobsite. Well worth it.

  • video iconCasters on basket

    Although it is far more convenient to be two men to move a basket, casters will ease your task. No need to carry dolly, just pure efficiency.

  • Winter start package

    Only one 110V AC plug is necessary to warm starter, battery and hydraulic oil tank. For those who’s next project is a garage for equipment, a safe way to put your machine to work in (almost) every weather conditions.

  • Hostile kit

    Despite all planning and care, accidents unfortunately happen. The 1/4 of an inch heavy duty thick aluminium plates composing the hostile kit will greatly minimize the impacts of such accidents on vital components of the unit: ground lever controls, outrigger switches and cylinders.

  • video iconActive envelope stability management system

    The active stability management system is composed of redundant switches (Telemecanique) on each outrigger and is designed to prevent dangerous movements.

  • Pilot lamps 85-135Easy to read operational pilot lamps

    For faster and more efficient troubleshooting both from basket and base, the easy to read pilot lamps will quickly tell which condition isn’t met or what the current situation is.

  • Wind safe up to 28 mph (45 km/h)

    The wind factor needs to be considered at all time when working in height. This unit is fully safe under 28 Mph.

  • video iconSmooth and automatic basket leveling

    The hydraulic compensation system will keep basket leveled to the ground all the time without any interaction required from operator. For specific needs and tricky situations, there is a manual override.

  • Lifting points located on top of the outriggersTop mount lifting points

    Given their position, on top of the folded outriggers, the top mount lifting points will not require the use of spreader bars upon lifting. Their position also leave the weight of machine below them, preventing side shifts.

  • 85-135 ground & Basket controlsProportional hydraulic joystick controls

    Intuitive real live hydraulic joysticks (Sauer Danfoss bloc valve) from base activated with electro-proportional controls in basket (Penny & Giles). The overall combination provides smooth and safe movements to operator.

  • video iconEmergency descent system

    The standard manual emergency descent system makes every movement possible even when all power sources are out. There is an optional emergency electric pump available.

  • Basket anti overload system

    The anti-overload system is designed to prevent operation of unit with an overloaded basket. An alarm and a red light, both at base and basket will confirm. This system can be verified by operator during daily inspection.

  • Harness anchor points

    All units are standard equipped with 2 harness anchor points located inside the aluminium basket. Additional anchor points are located on fiberglass basket’s floor.

  • Long travel outriggersvideo icon

    The linkage in the middle of the long travel outriggers provides the unit with lots of flexibility to stabilize on any type of unleveled surfaces.

  • Variable outriggers patternsvideo icon

    There are multiple outriggers positions since every outrigger is mounted on a swing-out pivot, allowing standard position (19’ X 20’) or narrow position (12’ 7” X 24’ 11″). For crowded floors, it is possible to mix positions for more flexibility.

  • High departure angle

    video iconThis is defined by how easy will you be able to climb any given obstacle (stairways, slopes, crosswalks, etc.) with limited use of ramps, wood blocks or else. Please click here to view a video explaining departure angle in more details.

  • High speed operational boom

    Lower and upper booms are independently operable, allowing far better insertion strategies.

  • 360 degrees turret rotation

    Offering reach all around the clock, this allow working at multiple working areas from the same stabilization spot.

  • video iconArticulated jib operable at full basket capacity

    The jib is live even at full basket capacity (440 pounds). It offers maximum flexibility for better final positioning to working area and better clearance of obstacles while driving.

  • Easy access to components

    Minimal hood dismounting is required to access most of main components of machine. Switches are accessible easily and hoses runs outside of the booms allowing inspection and repairs within minutes right on jobsite.

  • Detachable basket

    The standard lightweight aluminium detachable basket can be removed in seconds from unit to allow insertion in tight places, doors, gates, etc. Optional casters can be installed on baskets so they can be transport easily.

  • Lifting points located on top of the outriggersTop mount lifting points

    On top of being safe due to their location on the machine, top mount lifting points allow to insert unit in even harder-to-reach areas and places with a crane.

  • Anchor pointsTie down anchor points

    Strategically positioned tie down anchor points in back and front of unit will ease all your transport on trailer.

  • video iconHigh tensile steel booms

    All Easy Lift unit’s booms and structural components are made from Swedish highly tensile and flexible Domex SSAB steel. It allow the production of smaller, yet more resistant components.

  • Standard high quality components

    Most of components used in our units are commonly used in industrial mechanic, equipment on the market and available everywhere in North America.

  • External power track

    All hoses and harness are routed outside of the boom, protected by heavy duty aluminum cover fixed to main boom. Therefore, all hoses and harness can be inspected and replaced quickly right on jobsite.

  • video iconTelescope cylinder

    The telescopic boom cylinder is mounted inside of the boom, to offer better protection. You can click here to view a 6 minutes video showing how mounting/dismounting is easy to do.

  • External adjustable wear pads

    Wear pads can be adjusted easily, no shimming required. Most can be replaced without the need to de-booming for extra convenience.

  • Greasable fittings in all pivot points

    All pivot points are easily accessible to prevent jerking, squeaking and insure a smooth pivot articulation.

  • Multiple colors from RAL color codeHigh quality powder coat paint

    Multi-layer powder coat baked paint is applied before parts assembly, offering the same protection everywhere on parts. Customs colors are available in option.

Gallery

Simple Inside™ Newsletter