-
EXCLUSIVE FEATURES
-
Working sideways is allowed in Narrow Mode
-
48′ outreach with 265lbs inside basket
87-48AJ
- Home
- Compact tracked lifts
- 87-48aj
“After 2 full seasons with my Easy Lift 70-36AJ, the lift has performed as expected and flawlessly.”
Devon Hutton, Sugarbush Tree Service
Standard Features
- 87′ working height
- 48′ horizontal outreach (265lbs)
- 35″ total width
- 507lbs lift capacity
- 265lbs at 48′ outreach
- Unbeatable departure angle
- Wired remote control
- Light aluminium detachable basket
- Hydraulic basket rotator
- Hydraulic variable width carriage
- Automatic self leveling for outriggers
- Extra-long black rubber tracks
- AC Power + Air/water line to basket
- Proportional controls
Options & Accessories
- Emergency 12V electric pump
- Full arborist package
- Radio remote control
- Non-marking soft rubber tracks
- Special painting
- Working lamp on basket
- One man fiberglass basket
- Two men fiberglass basket
- Outriggers “sinking” alarm
- Teflon pads kit (4) for stabilizers
- Strobe light
- Casters on basket
- Winter start package
- Hostile kit
-
-
Kubota diesel 12V + 208-240V AC Electric
The EPA Tier 4 Certified Kubota D902-E3B water cooled diesel engine with real 12V provides peace of mind. This extremely tough and quiet engine offers TVCS (Tree Vortex Combustion System) for better emission and lower fuel consumption. The top of line Lafert 208-240V AC Electric motor allow drive and boom operation with no emission.
-
Kubota diesel 12V + Lithium Ion Battery
The Kubota D902-E3B water cooled diesel engine with real 12V provides peace of mind. This extremely tough engine comes in a single block, without any external added components such as fan, alternator and strap. This brings easiness of maintenance, reliability and durability to your combustion power source. Equipped with the electric vehicle range world record holder Kaitek srl lithium ion battery pack, no wires, no combustion and no boundaries. The ultra-fast charger can be powered with either 110V or 208-240V.
-
-
Lithium Ion Battery
Equipped with the electric vehicle range world record holder Kaitek srl lithium ion battery pack, no wires, no combustion and no boundaries. The ultra-fast charger can be powered with either 110V or 208-240V.
-
Wireless remote control
The remote provides perspective. Driving, operating outriggers and jib is possible from the wireless remote control allowing better view of obstacles and terrain slopes & layouts. It comes standard with a neck strap for more stability, movement precision and safety.
-
Hydraulic Variable width carriage
Designed to easily provide extensive stability to this particularly narrow unit (35″) the real hydraulic track extension system is operated by a toggle switch located on remote control for more convenience will provide 14″ of ground clearance.
-
Automatic self leveling for outriggers
With the activation of a single toggle switch located directly on remote control, unit will level in a perfect way, regardless of the surface.
-
Lightweight aluminium detachable basket
The lightweight aluminium basket is movable by one person if required. This feature provides more flexibility when it’s required to insert unit in tight places. 6 bolts needs to be unscrewed to easily remove basket. Made from 6061T aluminum, it can host multiple accessories. Floor is made of anti-skid plate and a 6 inches toe board.
-
Articulated jib operable at full basket capacity
The jib is live even at full basket capacity (507 pounds). It offers maximum flexibility for better final positioning to working area with its incredible -80° / +60° articulation, and better clearance of obstacles while driving.
-
Hydraulic basket rotation
Key element to refine working position, real hydraulic rotation offers better insertion and final adaptability, it allows optimal working conditions.
-
Travel alarm
This audible alarm will go as long as unit moves both in combustion or electric mode. With safety standards present and future, this is a great safety asset.
-
Extra-long black rubber tracks (6.5 feet)
Major increase in both stability and weight distribution, extra-long black rubber tracks also provides enhanced climbing capability to unit. Made of durable rubber with a steel belt reinforcement, they are built to last.
-
Variable outriggers patterns
There are multiple outriggers positions since every outrigger is mounted on a swing-out pivot, allowing standard position (11’ 5” X 11’ 5”) or narrow position (8’ 3” X 14’ 7”). For crowded floors, it is possible to mix positions for more flexibility.
-
AC power to basket
All units are equipped standard with GFI double outlet, with cable running through the boom.
-
Air/water line to basket
Standard 3000 psi air/water line also runs from ground to basket through the boom to offer more flexibility and less weight in basket.
-
Proportional controls
Sauer Danfoss proportional ground controls allow smooth movements from both ground and basket controls. From basket, electric signal is sent down to ground and levers perform movements.
-
Manual Emergency descent system
In case of minor problems or accidents, manual emergency descent pump will get the operator down by doing boom operations, outriggers setup and drive the unit if need be. An electric pump is available in option.
-
Hour meter
To insure increased accuracy of maintenance schedule, the hour meter will be of great help to follow-up on inspections and maintenance.
-
Emergency descent 12V electric pump
Bringing harm operator or broken basket control to the ground is always possible from base using emergency descent procedure. Electric 12V emergency pump just makes it easier since no manual pumping is required.
-
Non-marking soft extra-long rubber tracks
Never leave black marks anymore on all type of surfaces. Concrete, brick patio, stone, marble, wood, epoxy coating, and on. You will drive on 6.5 feet long non-marking tracks with peace of mind and won’t need to bite on your profit to clean afterwards.
-
Special painting
Choose from over 1 million different colors to personalize your unit to your company’s colors using RAL international standard colors. The powder coat custom colors will be applied before assembly for better protection.
-
Working lamp on basket
For a better view of working area, under any circumstances, this powerful lamp will bring the sun everywhere.
-
One man fiberglass basket
Very popular with Utility and Tree Care markets, the one man fiberglass basket will bring even more efficiency to whom works often in very tight places and hard-to-reach areas. There is no need to remove it at insertion and its dimensions makes it easy to insert within structure, branches, etc.
-
Two men fiberglass basket
This 2 men fiberglass basket provides more flexibility as of what tools can be carried up for work. The fiberglass makes insertion in branches as smooth as it can be.
-
Outriggers “sinking” alarm
The active stability system on all our units cannot prevent ground to collapse under it. As long as outrigger’s pressure is supported from ground, the unit will be able to work even if it is inclined. This system will warn operator that the whole unit is inclined and/or sinking, even if it’s not possible to tell from basket.
-
Teflon pads kit (4) for stabilizers
The outriggers needs some travel when they lift tracks off the ground. There are a few options available: 16 X 24 or 20 X 40 with or without sliding rails custom made teflon pads are designed to insure best load of each leg as well as best performance overall for operator.
-
Strobe light
With increasing safety regulations, this small option will soon make a huge difference: be able to go or not on a jobsite. Well worth it.
-
Casters on basket
Although it is far more convenient to be two men to move a basket, casters will ease your task. No need to carry dolly, just pure efficiency.
-
Winter start package
Only one 110V AC plug is necessary to warm starter, battery and hydraulic oil tank. For those who’s next project is a garage for equipment, a safe way to put your machine to work in (almost) every weather conditions.
-
Hostile kit
Despite all planning and care, accidents unfortunately happen. The 1/4 of an inch heavy duty thick aluminium plates composing the hostile kit will greatly minimize the impacts of such accidents on vital components of the unit: ground lever controls, outrigger switches and cylinders.
-
Active envelope stability management system
The active stability management system is composed of redundant switches (Telemecanique) on each outrigger and is designed to prevent dangerous movements.
-
Easy to read operational pilot lamps
For faster and more efficient troubleshooting both from basket and base, the easy to read pilot lamps will quickly tell which condition isn’t met or what the current situation is.
-
Wind safe up to 28 mph (45 km/h)
The wind factor needs to be considered at all time when working in height. This unit is fully safe under 28 Mph.
-
Smooth and automatic basket leveling
The hydraulic compensation system will keep basket leveled to the ground all the time without any interaction required from operator. For specific needs and tricky situations, there is a manual override.
-
Top mount lifting points
Given their position, on top of the folded outriggers, the top mount lifting points will not require the use of spreader bars upon lifting. Their position also leave the weight of machine below them, preventing side shifts.
-
Proportional hydraulic joystick controls
Intuitive real live hydraulic joysticks (Sauer Danfoss bloc valve) from base activated with electro-proportional controls in basket (Penny & Giles). The overall combination provides smooth and safe movements to operator.
-
Emergency descent system
The standard manual emergency descent system makes every movement possible even when all power sources are out. There is an optional emergency electric pump available.
-
Basket anti overload system
The anti-overload system is designed to prevent operation of unit with an overloaded basket. An alarm and a red light, both at base and basket will confirm. This system can be verified by operator during daily inspection.
-
Harness anchor points
All units are standard equipped with 2 harness anchor points located inside the aluminium basket. Additional anchor points are located on fiberglass basket’s floor.
-
Variable outriggers patterns
There are multiple outriggers positions since every outrigger is mounted on a swing-out pivot, allowing standard position (11’ 5” X 11’ 5”) or narrow position (8’ 3” X 14’ 7”). For crowded floors, it is possible to mix positions for more flexibility.
-
High departure angle
This is defined by how easy will you be able to climb any given obstacle (stairways, slopes, crosswalks, etc.) with limited use of ramps, wood blocks or else. Please click here to view a video explaining departure angle in more details.
-
High speed operational boom
Lower and upper booms are independently operable, allowing far better insertion strategies.
-
400 degrees turret rotation
Offering reach all around the clock, this allow working at multiple working areas from the same stabilization spot.
-
5 feet articulated jib
The jib is live even at full basket capacity (507 pounds). It offers maximum flexibility of -80° / +60° for better final positioning to working area. It also can be elevated while driving to allow better clearance of obstacles.
-
Easy access to components
Minimal hood dismounting is required to access most of main components of machine. Switches are accessible easily and hoses runs outside of the booms allowing inspection and repairs within minutes right on jobsite.
-
Detachable basket
The standard lightweight aluminium detachable basket can be removed in few minutes from unit to allow insertion in tight places, doors, gates, etc. Only 6 bolts needs to be unscrewed to easily remove basket. Optional casters can be installed on baskets so they can be transport easily. Click here to view an extended video showing how easy it is to dismount basket from unit.
-
Top mount lifting points
On top of being safe due to their location on the machine, top mount lifting points allow to insert unit in even harder-to-reach areas and places with a crane.
-
Standard common 12V components
The electrical system is composed of standard 12V north american easy to find solid state and compatible components. No hassle in finding 24V parts.
-
High tensile steel booms
All Easy Lift unit’s booms and structural components are made from Swedish highly tensile and flexible Domex SSAB steel. It allow the production of smaller, yet more resistant components.
-
Standard high quality components
Most of components used in our units are commonly used in industrial mechanic, equipment on the market and available everywhere in North America.
-
Patented telescopic boom power track
All hoses and harness are routed inside of the boom, protected by heavy duty unbreakable patented telescopic power track. All hoses and harness can be inspected and replaced quickly right on job site.
-
External adjustable wear pads
Wear pads can be adjusted easily, no shimming required. Most can be replaced without the need to de-booming for extra convenience.
-
High quality powder coat paint
Multi-layer powder coat baked paint is applied before parts assembly, offering the same protection everywhere on parts. Customs colors are available in option.